The innovative Aqua-Mod Water Tank is unmatched in quality and value for money. Designed for homes, units and townhouses where water storage space is limited, its clean, smooth lines will create a seamless blend with your home’s architecture.
Urban Water Storage Solutions
With a slim width, Aqua-Mod Water Tanks fit neatly against walls and under eaves.
Available in un-painted galvanised or powdercoat painted in a huge range colours, a Stratco Aqua-Mod Rainwater Tank will complement any outdoor environment. With four sizes to choose from, there is an Aqua-Mod Tank for every requirement. The range includes a 1000 litre Two Module, an 870 litre Three Module, and a 2000 litre Four Module Water Tank.
Aqua-Mod Water Tank Features
The Two and Four Module Aqua-Mod Tanks are supplied with a 3/4″ outlet and tap, while the Three Module Tank has a 1/2″ outlet and tap. All Aqua-Mods are supplied with an inbuilt filter, a 400mm x 400mm inspection point with a cover, and all inlets and outlets are protected with mosquito proof wire.
Optional extras include a different sized outlet and tap, a factory fitted flushing plug, and a tank stand tailored to your tank size. The stands are 500mm high, engineered for strength and made from galvanised steel. Optional adjustable feet kits are available with your tank stand to provide a stable footing on uneven ground.
Rainwater Tank Maintenance
When installing your tank, ensure it is on a level, solid base. Do not store the tank on its side. Flush the tank before use, this is very important when connecting a pump. Do not stand on the top of the tank as the lid is not designed to support weight. When attaching the tap, use thread tape on the tap fitting and do not over tighten it. While the inlet filter provided with your tank will stop sticks and leaf debris entering the tank, it is also important to ensure the runoff area to the tank is free of debris. Clean the gutters every two months, or more regularly if trees overhang the roof. Remove any sludge from inside the tank when necessary. Do not scrub or scratch the interior surface of the tank because it has a protective coating covering the walls. Stratco tanks are produced from the highest quality materials and will provide many years of service if the important recommendations set out in the Stratco Selection, Use and Maintenance brochure are followed.
Aqua-Mod Tank Stands
Heavy-duty tank Aqua-Barrel tank stands are 450mm high, engineered for strength and made from galvanised steel. The tank stands have rounded ends to match the tank. Adjustable feet kits are available with your stand to provide a stable footing on uneven ground.
Get the full potential out of your rainwater tank with a complete range of pumps and accessories. A wide range of pumps are available. The pump you choose will depend on the tank size, the requirements of the appliance that will feed from the tank, the diameter of the plumbing pipes and the pressure required.
If you choose to run your appliances solely from tank water, you may need a top-up facility to fill part of the tank with mains water when the rainwater gets low. When connecting to mains water, a backflow prevention device is needed to prevent the reverse flow of polluted water from contaminating drinking water. Some pumps have backflow and top-up devices built into their design. We can supply separate top-up devices, backflow prevention devices and any pipes and fittings needed to complete the system.
Talk to us when making a decision about what tank, pumps and accessories are required for the application. When installing a rainwater tank, never attempt to install a tank to mains water without a qualified plumber.
Water Pumps and Accessories
- 300 Watt, 20 litres per minute pump, with pressure switch.
- 400 Watt, 25 litres per minute pump, with pressure switch.
- 500 Watt, 70 litres per minute pump, with automatic mains switch over.
- Pressure switch, pump installation kit.
- Automatic low level top up system.
- Rainwater tank level gauge.
Tank Accessories Heavy duty tank stands. Standard adjustable feet kit – Set of four and six. Heavy duty adjustable feet kit – Set of four and six. Factory fitted flushing plug. Extra socket fitted – 3/4″ and 1″ Screw nosed tap 1/2” Screw nosed tap 3/4”